Hacking Mikrotik Hotspot with MAC Address Cloning Method

One more way is to surf free hacking mikrotik hotspot. Actually this way is stale, but because I just practice then I write the steps. In addition to being able to remember if you forget to share it for others, who may not know or still do not understand. Usually when we connect with mikrotik hotspot then we will be faced with a menu mikrotik login before you can browse.

This is a way to bypass mikrotik login, actually more appropriate if the client is called cloning. The point is we do not have to login to be able to browse, because the target has been logged. We as his clone so no need to login. This trick can only work for a client that we are still connected to the hotspot clone.

Here are the steps:

1. Download first Netcut program, this program is to determine the MAC address is connected with us. Netcut can be downloaded here
2. Connect our computer with mikrotik hotspot
3. Run the program Netcut
4. Select LAN Card / NIC that we use by clicking on the Choice menu NetCard
   
   
   
5. Then click OK again to the main screen, select one of the connected network that will make our target (in this example the target is a network with IP 192.168.182.18). Which is obviously not our network or network server.
   
   
6. Copy the IP address and MAC address, you can also click PrintTable then block and copy paste into notepad to the next step.
   
   
7. After dipaste next step in notepad edit the MAC address, in this example [00:26:5 E: 60:81:1 C]. Remove the [:] to be 00265E60811C. This value we will use to change the MAC address.
8. Next we disable our first wireless LAN. Then open the properties of wireless LAN and change the value of L start Sulawesi nickel project Administration MAC Network, default is empty. Fill with the above, in this example 00265E60811C
   
   
9. Then we set our IP wireless LAN with the same IP is 192.168.182.18 and the contents are also DNS server address.
   
   
   For the DNS server address can be checked before we change MAC and IP. So the first time we connect to the hotspot, by typing the command from the command prompt
   C: \> ipconfig / all
10. The final step is re-enable our wireless LAN. Now we can browse without having permission to have a hotspot.
11. Results:
    Before performing the clone
    
    
    After doing a clone
    
    

This tutorial is only for those who are lazy to ask username and password on the admin network. Embarrassed to ask can not browse.

Another function of netcut is to disconnect from people who are one with our hotspot areas and take bandwithnya so that only our own internet connection is fast :)