USB Extender 10 m

Zen Kak this discussion is about How to Make a USB cable is 10 Meters.
Perhaps you have had, at the time of the flash or modem connects to the USB extension cable (USB Extender) turns the device is not recognized by your computer, but the flash, modem and port USBnya works well.
Why did this happen?

It does not recognize the flash, modem or other USB devices when you connect with an extension USB cable (USB Extender) is caused by the quality of the USB cable extender so poor that resulted in a decrease in current USB device we can not work perfectly.
As a result, our USB devices to not be recognized (USB can not Recognized). USB cable extender 10 meter manufacturer is not necessarily good quality and not necessarily suitable for our USB devices. In the price of a USB cable extender 10 meter is also fairly expensive at 100 thousand more. Small diameter copper grounding and poor quality led to a USB extender cable is sold in the market are less able to mendriver modem in a distance of more than 1 meter or modem will not be recognized.
How do I fix this:
This problem can be overcome by making your own USB cable extender using Belden UTP cable quality 1 (wired LAN / network). UTP cable has a copper core diameter larger than the regular USB cable extender, and a better quality of copper. This is because the UTP cable is used to transmit data with a little loss, so that we can make this advantage as a tool to make USB extender cable of good quality.
How to Make a USB Cable Extender 10-15 Meters.
We need to know first, regular USB cable extender consists of 4 wires are:

    red: 5 volts dc
    green: data +
    White: data -
    black: ground.
While UTP cable / LAN cable consists of 8 are:

    orange,
    orange and white,
    green,
    green and white,
    blue,
    blue and white,
    brown
    white chocolate.
Tools and Materials Preparation of USB Extender Cable 10 Meters:

    USB extender cable 1 Meter usual we have cut the plug on both ends. Plugs this is what we use.
    KW 1 Belden UTP cable: up to 15 Meters 10 Meters.
    Tenol / lead for connecting cables.
    Solder, scissors, cutter, and isolation.
The following USB cable extender configuration of UTP cable:

    UTP cable combined orange and white orange and red wires connected to the USB extender.
    UTP cable is connected to the green green USB cable extender.
    UTP cable is connected to the green-white-white USB cable extender.
    UTP cable and connected all the rest combined with the black USB cable extender. By enlarging the ground, then the possibility of loss (loss) is very small currents.

When finished, trim the isolation and connection cable with a USB cable extender 10-15 Meter is ready for use.
Good luck!
So .... finish ..... before .... for the post .. How to Make a USB Cable 10 Meter .. ane this time ya .... ente be looking for another article in this blog. If the ente, there could be requests to ane problem really. Ane ntar help as much as possible, hehehhe ........... ^ _ ^